IBAK PHOBOS jet nozzles are an extension to the proven IBAK Midi System for the inspection of laterals. They can be attached to the camera pushrod using a simple mounting procedure and allow inspection and cleaning to be carried out in a single operation.

In spite of their tiny dimensions, the nozzles provide not only excellent cleaning results but also good forward drive for the TV camera. This is achieved by the special design of the interior of the nozzle which minimises flow turbulence and the resulting reduction of performance with the nozzle.

Technical System Data

IBAK PHOBOS I

For 100 mm pipes upwards in combination with HSP cleaning hose and camera
Operating pressure: 120 bar
High-pressure hose: rubber steel 3/8”/100 m long
Rate of flow: 35 litres/min

IBAK PHOBOS II

For 100 mm pipes upwards in combination with HSP cleaning hose and camera
Operating pressure: 120 bar
High-pressure hose: 80 m 1/2" or 20 m 3/8”
Rate of flow: 50 litres/min

IBAK PHOBOS III

For 100 mm pipes upwards in combination with HSP cleaning hose and camera
Operating pressure: 120 bar
High-pressure hose: 80 m 1/2" and 20 m 3/8”
Rate of flow: 70 litres/min

Operating instructions: Special Accessory

IBAK's website: http://www.ibak.de

Content on this page requires a newer version of Adobe Flash Player.

About Us

Products

Contact

IBAK Phobos

Jet nozzle for mounting on pushrod and LISY systems. MODULAR I compatible.